• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Have an Emergency? Get Help Now
Shoreline Technology Solutions in Holland, MI

Shoreline Technology Solutions

Shoreline Technology Solutions

  • About
    • Testimonials
    • Blog
  • Services
    • Managed Services
      • Essential
      • Advanced Security
      • Compliance-as-a-Service
    • Co-Managed Services
    • Hardware Services
    • Cloud-Based Solutions
    • Disaster Recovery as a Service
    • VoIP (Internet Phone) Services
    • Free Network Assessment
  • Case Studies
  • Submit Ticket
  • Remote Assistance
  • Contact
  • Free Assessment

Microsoft Authenticator Setup Guide

Microsoft Authenticator helps protect your work account by confirming that you are the person signing in. Follow
these steps to install the app, connect your account, and test it.

Before you begin

Have your iPhone or Android phone, an internet-connected computer, and your work email address and password
ready. Keep both devices with you throughout setup. These instructions are for a work or school account; screens
may vary by phone and your organization’s settings.

Download the app on your phone

  1. Scan the correct QR Code below for your Android or IOS Phone.
  2. Open the app. Follow the opening prompts. Allow notifications when asked. Allow camera access so you can
    scan the setup code.
  3. If you have trouble with step 2, Find the Microsoft Authenticator using the App Store on your device. Search
    for the exact app name and confirm the publisher is Microsoft Corporation. The app is free. Tap Get or Install.
    If already installed, update it if an update is available.

Official Microsoft download page

iOS

To install Authenticator on your iOS device, scan the QR code.

Microsoft Authenticator for iOS QR code

or download and install Authenticator from the Apple app store.

Get the app

Android

To install Authenticator on your Android device, scan the QR code.

Microsoft Authenticator Android QR code

or download and install Authenticator from the Google play store.

Get the app

Start setup on your computer

  1. Open your browser. Go to https://mysignins.microsoft.com/security-info and sign in with your work email
    address and password. Complete any existing verification request.
  2. Add a sign-in method. Select Add sign-in method, choose Microsoft Authenticator (or Authenticator app),
    and select Add.
  3. Display the setup code. Select Next through the app installation and account setup prompts until a QR code
    appears. Leave that page open.

Already seeing a “More information required” or “Keep your account secure” prompt? Select Next and follow the
Microsoft Authenticator prompts until the QR code appears. Then continue to the next step.

Connect your phone and test setup

  1. On your phone open Microsoft Authenticator. Tap + or Add account, choose Work or school account, and tap
    Scan a QR code. Use the scanner inside Authenticator, rather than your phone’s regular Camera app.
  2. Scan your code by pointing your phone at the QR code on your computer. Check that your work account
    appears in the app. Keep your setup QR code private.
  3. On your computer select Next to send a test notification to your phone.
  4. On your phone open the notification. If asked, enter the number displayed on your computer and tap Yes or
    Approve. Unlock your phone with your PIN, fingerprint, or face recognition if prompted.
  5. Finish on your computer. Wait for the success confirmation, then select Next or Done as shown. Complete
    any additional verification method your organization requires. Confirm Microsoft Authenticator appears in
    your Security info list.

Setup is complete only after the test succeeds and the final confirmation is displayed.

Use the app when signing in

Sign in to your work account as usual. When Microsoft asks you to approve a sign-in, open Authenticator on your
phone. Enter the number shown on the sign-in screen if requested, then approve. When signing in on the same
phone, you may only need to tap Yes or Approve.

If the sign-in screen specifically asks for a verification code, open the correct work account in Authenticator and
enter its current code. Follow the prompt shown; a verification code and a number-matching approval are different
steps.

Only approve requests you started. If a request appears when you are not signing in, deny it and contact STS
through your usual support channel. Never share verification codes or approve a request because someone calls or
messages you asking you to do so.

If you need help

No notification? Open Authenticator manually. Check your internet connection and notification permissions, then
retry the sign-in.

QR code will not scan? Allow camera access, or choose Can’t scan the image on the computer and Enter code
manually in the app. Follow the displayed instructions.

Asked to approve on an old or unavailable phone? Choose Sign in another way if an alternate method is available.
Otherwise, contact STS for help restoring access.

Getting a new phone? Contact STS before wiping or trading in the old one. Keep the old phone until the new phone
is registered and tested. If your phone is lost or stolen, contact STS promptly.

No compatible phone, blocked setup, or different screens? Contact STS through your usual support channel so we
can help with the appropriate setup for your account.

Account setup instructions
Sign-in instructions and troubleshooting

Guard Your Business Against Ransomware!

Get the Guide

Footer

Contact

Shoreline Technology Solutions
828 Lincoln Ave.
Holland, MI 49423
Phone: (616) 394-1303

Message Us

Services

  • Services Overview
  • Managed Services
  • Co-Managed Services
  • Hardware Services
  • Cloud-Based Solutions
  • Free Network Security Assessment
  • Disaster Recovery as a Service

For Clients & Prospects

  • Testimonials
  • Blog
  • Client Knowledge Center
  • Submit Ticket
  • Remote Assistance
  • Payment Portal

Follow Us

  • Facebook
  • LinkedIn

Sitemap | Website Design by OptimWise